Front Dome Light Replacement.

Old Salt · Post by **Old Salt** » Sat Feb 20, 2021 1:23 pm

I have bought a complete set of LED interior lights. I have managed to swap out all of them except for the front dome/map lights. I just can't see how to gain access to the OEM bulbs. There is a pull off panel that gives access to the two T20 screws which leaves the switch and lamps panel loose. However I can't work out what to do to release the panel at the front. The cameras and sensors cover can be unclipped, but I fear it will break something if I force it. Has anyone been able to achieve this?
My Tiguan is a 18 reg SE Nav.
TIA

Essjay · Post by **Essjay** » Sat Feb 20, 2021 2:30 pm

Hi Old Salt, is this what you’re trying to do?

Steve

Old Salt · Post by **Old Salt** » Sat Feb 20, 2021 3:29 pm

Hi Steve, that's exactly the correct diagram. Thank you very much.
It seems I was following the wrong method. YouTube videos don't always have every possible trim version.

David

Old Salt · Post by **Old Salt** » Sat Feb 20, 2021 4:21 pm

Many thanks Steve, job done and all LED's are Canbus compatible and working perfectly with normal fade to off.

David

Essjay · Post by **Essjay** » Sat Feb 20, 2021 5:24 pm

Glad it all worked David.

Steve